Special Information

Quality Rustic AB; consists of both small and bigger sound knots, slightly open knots, big open knots are filled. few sap, heart traces, some cracks and machinery defaults witch go very well with the old look.
Please keep in mind that although the manufacturing procedure is the same different types of base flooring boards can have a slightly different colour
Aged solid flooring 14 mm: Customer has to accept that due to ageing process the boards will have more broken edges and mechanical defects and that a greater part of the flooring boards will have to be recut.
As wood is a living material, selling of an aged flooring has to be done on a sample board as big as possible, a small sample can not be representative for a whole floor.
In case of back orders we can not guarantee to deliver the same colour as the original floor. Our manufacturing procedures are always the same, but atmospheric influences can modify the end result. After installation the floor will equalise in time, and colour difference will be minimal.
Smoked floors: When the boards are smoked, the smoke reacts with the oak tannins and creates a beautiful deep colour. The colour can vary from plank to plank according to the content of tannins in each board. After a certain period the colour shall become 10 to 30% brighter, these colour variations are specific to smoked floors.
Easy maintenance is a result of the primer treatment of the wood and of the finishing with high quality hard wax oil
Usual care: during the first month the floor planks may be dry cleaned with a vacuum cleaner, a broom etc. Only after this period the floor may be cleaned with a very slightly humid cloth.
After some years of domestic use a very thin coat of maintenance oil may be applied with a cloth. This oil must be waxed into the floor with a wax machine or by hand, after this application do not use your floor for about 24 hours
Aged floors can be installed as follows: nailed; glued or floating